How do I control the heat on my propane grill?

Why is my grill not getting hot?

There are many areas of concern that can cause low flames, such as a faulty regulator, a leaking propane tank, a tripped OPD device and blocked orifices. If rotating the knobs clockwise on your gas grill doesn’t increase the size of the flame, troubleshoot some of these areas that can cause a low flame.

Does more charcoal mean more heat?

When grilling on high heat, create a two-fire zone: Stack more coals on one side of the grill for higher-temperature cooking, and the other side of the grill should have less charcoal for lower-temperature cooking.

How do I know if my grill is hot enough?

If you need to pull your hand away after 2 to 4 seconds, the heat is high. If you need to pull your hand away after 5 to 7 seconds, the heat is medium. If you need to pull your hand away after 8 to 10 seconds, the heat is low.

Why is my charcoal grill not getting hot enough?

If your grill is full of ashes from the last time you grilled it can impede the proper flow of air inside of the kettle, which makes the coals burn cooler. Fire needs oxygen, and if enough ash builds up inside of the grill it can make it next to impossible to get the coals burning well, or to keep them lit.

What is considered high heat on a grill?

High heat: 450 to 600 degrees



High heat allows for rapid cooking and searing hot temperatures. You use it for direct grilling.

How do I make my Weber gas grill hotter?

Light all the main burners and set them to high, then close the lid. Give your grill about 10 to 15 minutes and it should be in the 500 to 550 F range, which means your grill is now working properly.

Why is my natural gas grill not getting hot?

If your natural gas bbq has a low, yellow flame and isn’t giving out much heat, the regulator might be stuck. To remedy this, turn off the gas and disconnect the grill. Open the lid and turn all the controls to a high setting for a minute or so. Turn them off, reconnect the gas line and light the grill again.