How do you boil maple syrup at home?

How long does maple syrup take to boil?

Boil concentrated sap in kitchen until it reaches a temperature of 7 degrees over the boiling point of water (varies with elevation). Skim off foam, if necessary. Pour into sterilized canning jars, leaving appropriate head space, and cover with sterilized lids and rings. Process in boiling water bath for 10 minutes.

How long does it take to boil syrup?

In a high-sided saucepan over medium-high heat, bring cold water and sugar to a boil. Turn the heat to low and stir constantly until the sugar dissolves completely and the mixture is clear, approximately 3 to 5 minutes. Remember – the longer you boil it, the thicker the syrup will be when cooled.

What happens if you boil maple sap too long?

A hydrometer measures the amount of sugar in the syrup. When the sap reaches 66.9% sugar, it is then maple syrup. Maple syrup that is boiled too long will crystallize and maple syrup that isn’t boiled long enough will spoil quickly and will be watery because the concentration of sugar in the syrup will be too low.

How do I know when maple syrup is done boiling?

Finished maple syrup will be 7°F above the temperature of boiling water at your elevation. Your syrup or candy thermometer will tell you this. If you have a larger operation you may get a syrup hydrometer and testing cup which will tell you when the syrup is done.

Is cloudy maple sap OK to boil?

It takes about 40 gallons of sap to produce one gallon of maple syrup. So you need a lot of sap to make maple syrup. But sap will spoil (it gets cloudy and off-tasting) if it is left too long in storage. … It is possible to boil down sap into partial batches of syrup.

How long does it take to boil down 10 gallons of maple sap?

Boiling 10 gallons of sap down to 1/2 gallon took 3 hours (using 3 pans). We brought the almost-syrup into the house and spent another 20 minutes finishing it on the stove. And then we licked every spoon, bowl and pan that had any speck of maple syrup on it.

Do you add sugar to maple syrup?

The basic recipe calls for 2 parts of sugar combined with one part of water. Double or halve the recipe according to the quantity you need. It has been observed that using just white sugar makes the maple syrup runny. Adding honey or brown sugar is a great idea that thickens the syrup and gives it a warm golden color.

Can you boil sap in aluminum?

Pans made out of aluminum would likely present the same problems. During boiling they might warp out of level, causing high spots that could lead to scorching. If you ran your sap deep that might not be as big an issue though.

What temperature do you boil maple syrup?

Finishing Syrup

It is very difficult to finish syrup on a large flat pan over an open fire. Remove the pan with the concentrated sap from the fire before syrup is made. The sap should be at a boiling temperature around 217°F to 218°F.