How do I reset my Traeger grill?

Ensure you are on the latest version of the App. Factory Reset Grill – On grill go to menu, settings, about grill, then press and hold the ignite button until you see the Traeger logo (about 5-10 seconds). Check Firmware version – On grill go to menu, settings, about grill and confirm the grill has reset to 01.01.

How do I reset my Traeger?

Reset the WiFi Network Settings on the Grill Controller

1. On controller: Go to MENU > WIFI INFORMATION.
2. Hold IGNITE for 10-15s. This resets the WiFi settings and allows you to start over with a fresh initial pairing process on most grills.

Why is my Traeger not working?

If your Traeger grill fails to start, then some of the possible causes are a tripped GFCI on the outlet, bad power outlet, blown fuse on the back of the controller, bad extension cord, and break in the power cord. Your grill won’t light. … Also, your grill won’t light if no wood pellets are being fed to the firepot.

What to do if Traeger fails to ignite?

Failed to Ignite

1. Check to make sure there are pellets in both firepot and in the hopper. If empty or low, fill the hopper.
2. Check to ensure the lid was kept close during start-up.
3. Ensure the pellets being used are good. Pellets should have a shine to them and snap when broken.

Why does my Traeger keep saying LEr?

If a LEr error code has appeared on your display of a grill, it means the temperature of the grill is less than 125 degrees Fahrenheit. It may happen if you set it for a low and slow smoke, or maybe you ran out of pellets or they are too dusty and the fire pot is too dirty and stuffed.

Why is my Traeger not getting up to temp?

Not having enough pellets in the hopper, or even having old/poor quality pellets, can cause temperature issues or the flame to go out. Check the pellet level in the hopper. If you’ve run out of pellets or notice some tunneling, learn more here.

Why is smoke coming out of my Traeger hopper?

This may seem alarming, but seeing smoke coming from the hopper during a cook is indicative of an airflow issue–not the pellets in the hopper ready to ignite. Typically the fan is not blowing to create the correct pressure to vacuum out the exhaust, allowing smoke to escape out of the hopper.

Should Traeger smoke all the time?

To get a smokier flavor in your food, you will need to leave the Traeger set to smoke for a longer period of time. The amount of time you want your food to smoke will depend on what you are cooking. … Many models of Traeger grill will not produce a lot of smoke once set to higher temperatures.

Is it bad to run a Traeger without pellets?

You can’t use Traeger without pellets. If your Traeger running out of pellets while cooking, the temperature of the grill decreases and flame off the Traeger eventually. It may be dangerous to use an electric pellet grill without pellets. Always ensure there are enough pellets in the hopper before cooking.

Is it bad for a Traeger to run out of pellets?

Running out of Pellets during a Cook



While tunneling is a false alarm of sorts, it’s still possible that you will actually run out of pellets during a cook. If you do run out of pellets in the middle of a cook, don’t worry: getting back grilling is easy. First, check your grill’s temperature.

How do I know if my Traeger Hot Rod is bad?

Check the Hot Rod

1. If the Induction Fan turns on – the controller is fine, and the Hotrod is bad.
2. If the Hotrod turns on (3+ minutes) and the induction fan does not – the controller is bad, and the components are fine.
3. If neither component is turning on – the controller and the Hotrod need to be replaced.

Why does my Traeger keep shutting off?

It may be that the outside temperature is so cold your Traeger can’t get up to temperature. There may be debris that’s plugging your fire pot and preventing ventilation (you need oxygen for a fire). Maybe you’ve got a bad batch of pellets that’s full of sawdust. It could be a faulty probe.