How do I add baking soda to my pool?

A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.

Will baking soda lower chlorine level in pool?

Chlorine works most efficiently in water with a neutral pH level between 7.4-7.6. If the pool is too alkaline, or more than a pH of 8.0, the efficiency is less than 20 percent. … To raise your pH levels, it can be as simple as adding seven to nine pounds of baking soda to your pool water.

How much baking soda do I add to my pool calculator?

To calculate how much baking soda you should add, first determine the amount of gallons of water in your pool. Then add 1.5 pounds of baking soda for every 10,000 gallons of water to increase the pool’s total alkalinity by 10 ppm.

What does baking soda do for pools?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

Can I add shock and baking soda to my pool at the same time?

80 TA is just fine. Don’t add baking soda. But you can go ahead and add enough CYA to get to 30 and just assume it’s there and use 12 FC as your new SLAM level.

Does chlorine lower or raise pH?

Using liquid chlorine raises the pH of the water.



Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH. … So the net effect on pH is zero (or almost zero).

Can I use Arm and Hammer baking soda in my pool?

ARM & HAMMER™ Baking Soda is safe and natural so it can be used on just about anything—including your kids’ toys. Here are some more handy uses for around the pool. Clean thoroughly with a solution of ARM & HAMMER™ Baking Soda and water.

Can too much chlorine make pool cloudy?

Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.

What if you put too much chlorine in your pool?

Chlorine, either solid or liquid, is a pesticide used in pools to destroy germs, including those from feces, urine, saliva and other substances. But excessive exposure to chlorine can cause sickness and injuries, including rashes, coughing, nose or throat pain, eye irritation and bouts of asthma, health experts warn.

Should I shock pool if chlorine is high?

In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero. The chloramines or combined chlorine level rises above 0.5 parts per million (ppm).

Is pH increaser the same as baking soda?

Baking soda (sodium bicarbonate) is also an alkaline substance, but with a lower pH level of 8 – commonly used to increase pH and total alkalinity. In fact, most pH Increaser products are just baking soda in a fancy bottle! Using baking soda will affect the pool’s total alkalinity more than the pH.

How long after adding baking soda can you swim?

It’s safe to swim immediately after adding, but you should turn on your pool’s circulation system to help it dissolve.