Quick Answer: How long should you boil maple syrup?

Fill a boiling pot with 5 gallons of sap. Boil the sap for approximately 4 hours. When you have about a half gallon left in the pot, finish boiling on a stove. The syrup is done when it reaches 219°F or 66% sugar content.

How do you know when maple syrup is done boiling?

Finished maple syrup will be 7°F above the temperature of boiling water at your elevation. Your syrup or candy thermometer will tell you this. If you have a larger operation you may get a syrup hydrometer and testing cup which will tell you when the syrup is done.

How long does it take to boil syrup?

In a high-sided saucepan over medium-high heat, bring cold water and sugar to a boil. Turn the heat to low and stir constantly until the sugar dissolves completely and the mixture is clear, approximately 3 to 5 minutes. Remember – the longer you boil it, the thicker the syrup will be when cooled.

How long does it take to cook maple syrup?

How much time per gallon? For 20 gallons of sap to get 1/2 gallon of syrup, the whole process can take 2 days, about 12 to 14 hours, outside over a wood fire. You’re going to want to cook it down outside until you only have a couple gallons left, otherwise you’ll be wasting a lot of money on electricity or gas.

What temp do you boil maple syrup to?

Finishing Syrup

The sap should be at a boiling temperature around 217°F to 218°F. Transfer the concentrated sap to a smaller boiling pan or pot and complete the finishing process on a controlled heat source such as a gas burner, camp stove or kitchen range. water loss from the syrup and maintains proper density.

Should I refrigerate maple syrup?

Should your maple syrup go in the pantry or the fridge? The answer is both. … Once opened, store pure maple syrup in the refrigerator to prevent it from spoiling or growing mold. Since table syrup isn’t made from the pure, natural syrup that comes directly from trees, there’s no need to refrigerate it once it’s opened.

Is cloudy maple sap OK to boil?

It takes about 40 gallons of sap to produce one gallon of maple syrup. So you need a lot of sap to make maple syrup. But sap will spoil (it gets cloudy and off-tasting) if it is left too long in storage. … It is possible to boil down sap into partial batches of syrup.

Can you boil maple sap in aluminum?

Pans made out of aluminum would likely present the same problems. During boiling they might warp out of level, causing high spots that could lead to scorching. If you ran your sap deep that might not be as big an issue though.

When should you stop collecting maple sap?

The best sap flows come when nighttime temperatures are in the low 20s and daytime temperatures are in the 40s. The longer it stays below freezing at night, the longer the sap will run during the warm day to follow. If the weather gets too cold and stays cold, sap flow will stop.

What happens if you boil spoiled maple sap?

Maple syrup that is boiled too long will crystallize and maple syrup that isn’t boiled long enough will spoil quickly and will be watery because the concentration of sugar in the syrup will be too low.

What’s the best way to cook down maple sap?

How to Boil Maple Syrup – Steps:

1. Set up a turkey fryer or wood fire in a safe place.
2. Fill a boiling pot with 5 gallons of sap.
3. Boil the sap for approximately 4 hours.
4. When you have about a half gallon left in the pot, finish boiling on a stove.
5. The syrup is done when it reaches 219°F or 66% sugar content.

Can you fix burnt maple syrup?

Fill the pan with a mixture of white vinegar and water and bring it up to a boil. Let it sit until it is cool enough to get in there and scrub with a non abrasive brush. Most of it should lift right off without scrubbing.