Best answer: Can you use corn oil to deep fry a turkey?

When deep frying a turkey, you can use any cooking oil that has a smoke point above 425 degrees Fahrenheit. Corn oil works well because it doesn’t smoke until 440 degrees Fahrenheit. However, canola oil (also known as vegetable oil) isn’t a good choice because it smokes at 400 degrees Fahrenheit.

What is the best oil to deep fry a turkey?

Canola oil is recommended because of its high smoke point and low allergy concerns. The ideal frying temperature is 375°F. Once you submerge the turkey, the oil temperature will drop.

Can I use vegetable oil to deep fry a turkey?

Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.

IT IS INTERESTING:  Can you fry things in a microwave?

How do you measure oil for deep frying a turkey?

MEASURING THE OIL FOR DEEP-FRYING

  1. Remove the giblets and neck from the turkey; place the turkey inside the fryer basket. …
  2. Remove the turkey, letting the excess water drip into the fryer, then measure the distance between the water level and the top of the fryer.
  3. Discard the water.

8 окт. 2018 г.

What is the best oil temperature to fry a turkey?

Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).

Do I need to brine a turkey before frying?

The first step to make a delicious fried turkey is to make a good brine that will infuse the turkey with flavor before it cooks. Make my favorite turkey brine which is savory, sweet and flavored with herbs and citrus notes. Place a thawed 12-15 pound turkey in the brine for 18-24 hours. Rinse then dry the brined bird.

How long does it take to fry a 10lb turkey?

Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound. A 10-pound turkey will take about 30 minutes. A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.

Can you mix oil to fry a turkey?

Mixing oil is fine, but beware that it’s going to burn at whatever temperature the easier to burn oil burns, not the average of the two. Depending on what kind of vegetable oil, the smoke point may be a bit lower than peanut, but should still be good to at least 400F or so.

IT IS INTERESTING:  How do I pan fry Hungarian sausage?

What happens if you deep fry a frozen turkey?

If you have a frozen turkey and begin lowering that turkey into a very hot bath of oil, here’s what’s going to happen. The ice that first touches the oil will begin to melt, then that water will rapidly heat and begin to boil, all near the oil’s surface, and then the steam will rapidly rise.

Do you need peanut oil to fry a turkey?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

How much oil do I need to fry a turkey in a 30 qt fryer?

You’ll need enough oil to cover your entire turkey, but not so much that it spills over. A general guideline is to use 3 gallons of oil for a 30 qt. pot and 3 1/3 gallons of oil for a 32 qt. pot.

How many minutes per pound do you fry a turkey?

Set the timer and cook the turkey about 3 to 4 minutes per pound. Cook all dark meat to an internal temperature of 175° F to 180° F, and all white meat to an internal temperature of 165° F to 170° F. Here’s some help on how to check your turkey’s temperature for doneness.

How long does it take to heat oil for deep fried turkey?

Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.

IT IS INTERESTING:  How do you fry pork chops without making them tough?

How long do you fry a turkey at 250 degrees?

Put the bird in at 250 and the oil will get hotter but never reach 350. Alton got this one wrong. Start timing when the turkey starts vigorously frying and roiling bubbles. 3-3.5 minutes per pound and take it out and temp it.

Can you deep fry a 24 lb turkey?

If you’re going to deep-fry a bunch of turkeys, you’d better have two or three propane tanks on hand. Set the propane tank as far away from the burner as the connections will allow. The 30-quart Bijou Classic is good for turkeys up to 14 pounds. The 32-quart pot is good for turkeys up to 24 pounds.

How long does oil take to heat to 350?

Set your burner on medium and let your pan of oil heat for around 5 to 10 minutes. Put the meat thermometer in the center of the oil to check the temperature. The oil should be between 350 degrees Fahrenheit (177 Celsius) and 400 F (205 C), depending on what you’re cooking.

Let's eat?